Lord Fusor Factory Match Catalyzed Seam Sealer
SKU: FUS-126
Shipping calculated at checkout.
Available to orderCheck the fit before you order. Ceiling height, door width and the route from the street decide whether equipment this size can be delivered and installed. Two minutes on the phone saves a freight truck turning around: 406-604-0949.
Sourced direct from the manufacturer
Every machine we list ships from the manufacturer or their authorized distributor, in the original crate, with the manufacturer's own warranty. We don't rebox, rebrand or drop-ship from marketplace sellers.
Specifications you can check
Where a manufacturer doesn't publish a number, we leave the row out rather than estimate it. If a spec you need isn't here, call us and we'll get it from the manufacturer.
Freight handled properly
Equipment this size moves on an LTL freight carrier, not a parcel van. We check your address for truck access before the order ships, and we'll tell you honestly if you need a liftgate or a pallet jack at your end.
Talk to someone who knows the equipment
Call 406-604-0949, Monday–Saturday, 8am–6pm Mountain. We'd rather spend ten minutes on the phone about your ceiling height and your driveway than have you buy the wrong machine.
We're here when you need us
406-604-0949Monday–Saturday, 8am–6pm Mountain Email usinfo@tourquebay.comAbout this product
A two-component catalyzed seam sealer for reproducing factory-appearance beads on truck beds, tooled door skins, floor pans and core supports. It goes onto bare or primed metal and holds its shape rather than slumping.
The point of a factory-match sealer is that the repair does not announce itself. A bead that can be tooled to match the one next to it is the difference between a repair and an obvious repair.
The fast grades give roughly three minutes of work time at 70 degrees Fahrenheit, are paintable in ten minutes and fully cured in 24 hours. Medium and slow set versions are available if you need longer on the tool.
Specifications
Safety
Read the manufacturer's safety data sheet before use. This product is classified as a skin sensitizer, category 1A - it may cause an allergic skin reaction, and once you are sensitized you are sensitized for good.
Wear neoprene, nitrile or rubber gloves and safety glasses with side shields, or chemical goggles if there is any chance of splashing. Avoid breathing the vapor or mist and work with adequate ventilation. The manufacturer states this product is for industrial and commercial use only and must be applied by trained personnel.
Tell us which grade and cartridge size you need when you order - call 406-604-0949 - and we will make sure you get the right one.
Specifications
| Type | Two-component catalyzed non-sag seam sealer |
|---|---|
| Work time | About 3 minutes at 70 F on the fast grades |
| Paint time | 10 minutes |
| Full cure | 24 hours at 70 F |
| Lap shear strength | 2,100 PSI on e-coat steel |
| Elongation | 166 percent |
| Shelf life | 24 months unopened at 75 F |
| Grades | Fast, medium set, medium and slow |
Figures as published by Lord Fusor. If a specification you need isn't listed, call 406-604-0949 and we'll get it from the manufacturer rather than estimate it.
Will it fit your bay?
Fit for this item depends on your wall, bench or bay layout rather than ceiling height. Tell us what you're working with and we'll confirm it fits before you order, including whether it pairs with equipment you already own.
Shipping
This item ships by ground parcel service rather than freight, so there's no delivery appointment to schedule. Orders of $499 or more ship free, and tracking goes out by email once it leaves the warehouse.
Questions before you order? Call 406-604-0949, Monday–Saturday, 8am–6pm Mountain.
After you order
We confirm stock and access
We check availability with the manufacturer and confirm your delivery address works for the carrier. If something needs discussing, we call you before anything ships.
Tracking reaches you by email
Once the order leaves the warehouse you get the carrier and tracking number. For freight shipments the carrier contacts you to arrange a delivery window.
You inspect, then sign
Check the crate and the equipment before you sign the delivery receipt. Note any damage on the receipt, photograph it, and call us the same day.
Returns
Return terms are set by the manufacturer and differ by brand. Items must be unused and in original packaging. Call 406-604-0949 before sending anything back and we'll arrange it, and read our refund policy for the full terms.
If it arrives damaged, call 406-604-0949 and we'll sort it out. That's on us, not you.
Payment methods
Wire transfer
For larger orders we accept payment by bank wire. Call 406-604-0949 and we'll send the transfer details and confirm the order once funds arrive.
Cards and wallets
Major credit and debit cards and digital wallets are accepted at checkout.
