8ft Metal Pegboard Master Workbench Kit
SKU: 30-WRK-800 WB
Shipping calculated at checkout.
Available to orderCheck the fit before you order. Ceiling height, door width and the route from the street decide whether equipment this size can be delivered and installed. Two minutes on the phone saves a freight truck turning around: 406-604-0949.
Sourced direct from the manufacturer
Every machine we list ships from the manufacturer or their authorized distributor, in the original crate, with the manufacturer's own warranty. We don't rebox, rebrand or drop-ship from marketplace sellers.
Specifications you can check
Where a manufacturer doesn't publish a number, we leave the row out rather than estimate it. If a spec you need isn't here, call us and we'll get it from the manufacturer.
Freight handled properly
Equipment this size moves on an LTL freight carrier, not a parcel van. We check your address for truck access before the order ships, and we'll tell you honestly if you need a liftgate or a pallet jack at your end.
Talk to someone who knows the equipment
Call 406-604-0949, Monday–Saturday, 8am–6pm Mountain. We'd rather spend ten minutes on the phone about your ceiling height and your driveway than have you buy the wrong machine.
We're here when you need us
406-604-0949Monday–Saturday, 8am–6pm Mountain Email usinfo@tourquebay.comAbout this product
The largest kit Wall Control makes: six 32 by 16 inch steel pegboard panels covering a full 8 foot by 32 inch run of wall, with 47 accessories to hang off it.
This is the one for the wall behind a workbench, where you want everything within arm's reach and you are tired of digging through drawers. Fifteen hanging bins take the small parts, the shelves take what will not hang, and the screwdriver and hammer holders mean the tools you use constantly have a home you do not have to think about.
Specifications
In the kit: one 9 inch shelf assembly, two 9 inch shelf dividers, one 6 inch shelf assembly, fifteen plastic hanging storage bins with hangers, one dowel rod and 4 inch shelf assembly, one spray can holder for four cans, two screwdriver holders holding six each, two hammer holders, and an assortment of 22 further hooks and brackets.
The whole point of a steel pegboard over hardboard is that the hooks stay put. Hardboard hooks lift out every time you take a tool off the wall; these lock into formed steel slots and stay where you put them.
Panels mount straight to the wall on the formed return flange - no rail system to buy and no frame to build. Fix into studs wherever you can: the capacity roughly doubles compared with drywall anchors.
Not sure how much wall you need, or which color combination? Call 406-604-0949 and we will work it out with you.
Specifications
| Material | 20 gauge steel with a scratch-resistant baked-on powder coat |
|---|---|
| Weight capacity | Up to 100 lb per panel on drywall, up to 200 lb per panel fixed into studs |
| Mounting | Patented 3/4 in formed return flange, pre-drilled for standard 16 in stud centers. Screws and drywall anchors included, no rails or framework needed |
| Made in | USA |
| Warranty | Limited lifetime against product failure and manufacturing defects |
| Panels | Six panels, 32 in H x 16 in W - covers 96 in x 32 in installed |
| Accessories | 47 pieces |
| Colors | Pegboard in metallic, black, white, red, blue, green, orange, yellow, gray, beige, gold, pink or purple. Accessories in black, white, red or blue |
Figures as published by Wall Control. If a specification you need isn't listed, call 406-604-0949 and we'll get it from the manufacturer rather than estimate it.
Will it fit your bay?
Fit for this item depends on your wall, bench or bay layout rather than ceiling height. Tell us what you're working with and we'll confirm it fits before you order, including whether it pairs with equipment you already own.
Shipping
This item ships by ground parcel service rather than freight, so there's no delivery appointment to schedule. Orders of $499 or more ship free, and tracking goes out by email once it leaves the warehouse.
Questions before you order? Call 406-604-0949, Monday–Saturday, 8am–6pm Mountain.
After you order
We confirm stock and access
We check availability with the manufacturer and confirm your delivery address works for the carrier. If something needs discussing, we call you before anything ships.
Tracking reaches you by email
Once the order leaves the warehouse you get the carrier and tracking number. For freight shipments the carrier contacts you to arrange a delivery window.
You inspect, then sign
Check the crate and the equipment before you sign the delivery receipt. Note any damage on the receipt, photograph it, and call us the same day.
Returns
Return terms are set by the manufacturer and differ by brand. Items must be unused and in original packaging. Call 406-604-0949 before sending anything back and we'll arrange it, and read our refund policy for the full terms.
If it arrives damaged, call 406-604-0949 and we'll sort it out. That's on us, not you.
Payment methods
Wire transfer
For larger orders we accept payment by bank wire. Call 406-604-0949 and we'll send the transfer details and confirm the order once funds arrive.
Cards and wallets
Major credit and debit cards and digital wallets are accepted at checkout.
More from Wall Control
Signature Series Textured Matte Metal Pegboard Panel - Vertical 32in x 16in
$66.00
Horizontal Metal Pegboard Panel 16in x 32in
$54.00
Wall Controls Magnetic Tool Holder Organizer
$66.00
Pegboard Power Strip Charging Station Outlet Rail
$78.00
"Perfect Starter Accessory Pack" The Most Popular Wall Control Pegboard Hook Set
$119.99